Page tree
Skip to end of metadata
Go to start of metadata

This sections shows the default error codes set in the switch,

You can change them according to your convenience

You can go on this option by clicking on Configuration → Global Route Error

Below displayed window will appear,

Screenshot: Global Route Error

Column Name


Error Code

The Error Code is returned by Egress Trunk

Error Description

The Error Description is description of Error Code

Default Response

The Default Response If there is no Pre-defined Response, this rule will be applied

Code Response: The response code sends to the client

Release Cause: The reason sends to the client

User-defined Response

The global route error is defined by the User

Code Response: The response code sends to the client

Release Cause: The reason sends to the client

You can use the Pre-defined pattern of Error codes & if you wish to change according to your convenience you can do so following with above mentioned steps in table

After making changes click on Submit button  to save changes and if you want to reset it to default setting, click on Reset to Original  

We will understand some Error Response and about their description,

Default Response

Error Response


402 Payment Required

This response code is reserved for future use Initial aim for creating this code was using it for digital payment systems however this is not used currently

403 Forbidden

The server understood the request but refuses to authorize it

415 Unsupported Media Type

The server is refusing to service the request because the entity of the request is in a format not supported by the requested resource for the requested method

482 Loop Detected

Server has detected a loop

503 Service Unavailable

The server is currently unable to handle the request due to a temporary overload or scheduled maintenance, which will likely be alleviated after some delay

Related pages

Recently Updated Pages

  • No labels