Page tree
Skip to end of metadata
Go to start of metadata

This module will give you a detail knowledge from how to start on the Switch.

Like From starting such as Creating a Client & Vendor, their Rate Tables, then Routing and at last their Call Simulation so that you can confirm that your setup is correct.


First of all the First thing we need to create is Rate Table for both the Customer & Vendor.

To create Rate Table, Click on Routing → Rate Table

Below displayed window will appear.

Screenshot: Rate Table

On Rate Table window, Click on Create New Button to open New Rate Table Window,

Screenshot: New Rate Table A-Z Type

For more information regarding Creating Rate Table, Types of Rate Table. Please refer to Rate Table Section.

Create Rate Table for both Client & Vendor. After creating Rate Table for both, you can now proceed to Next Section.


Now we will create a New Vendor, To create a New Vendor

Click on Termination → Vendor

Below displayed window will appear.

Screenshot: Vendor List

On Vendor window, Click on Create New Button to open New Vendor Window,

Screenshot: Basic Information of vendor

For more information regarding Creating Vendor, Please refer to Vendor section.

After creating a New Vendor, we will proceed to create Trunk for Vendor. Trunks are of 2 types → Egress & Ingress

For Vendor we will create a new Egress Trunk.

Go to Routing → Trunks → Egress

Below displayed window will appear.

Screenshot: Egress Window

The options marked in red is the Egress Trunk Menu.

On the Egress window, Click on Create New Button to create a new Egress Trunk,

Below displayed window will appear.

Screenshot: New Egress Trunk

On the New Egress Trunk window, Create Egress Trunk for the Vendor you created earlier. You have to choose the Vendor Name from the Carrier dropdown & assign Rate Table you have created above for Vendor.

For more Information to Create a New Egress Trunk, Please refer to Trunks section.

After completing the Trunk creation for the Vendor.


We will move to the Next step that is Dynamic or Static Routing, whichever is okay as per your convenience.

We will create Dynamic Routing,

To create a new Dynamic Routing, Click on Routing → Dynamic Routing

Below displayed window will appear.

Screenshot: Dynamic Routing

On Dynamic Routing section, Click on Create New Button

Below displayed window will appear.

Screenshot: Create Dynamic Routing

You can Create Dynamic Routing from here, You have to mainly select the Vendor in Carrier option and Egress Trunk as we have created earlier.

For more information regarding Dynamic Routing please refer to Dynamic Routing Section.

After creating a Dynamic Routing, you have to create a Routing Plan using this Dynamic Routing.


We will move to Routing Plan section now.

To go to this section, Click on Routing → Routing Plan

Below displayed window will appear.

Screenshot: Routing Plan

On Routing Plan section, Click on Create New Button, A blank form will appear as displayed below.

Screenshot: New Routing Plan

Enter the Name in the field to set the name of new Routing Plan. After entering the name click on SAVE Icon to create a new routing plan.

Now we will see how to edit the routing plan and add new routings rules in Routing Plans.


To add a new Routing rule in Routing Plan, click on the Routing Plan name.

Below displayed window will appear.

Screenshot: Routing Plan

To create a New Routing Rule in Routing Plan, Click on Create New Button

Below displayed window will appear where you can create a new rule.

Screenshot: Add New Route

As we have created a Dynamic Routing above so we have to choose Dynamic Routing in Route Type & select the Dynamic Routing which we have created above.

For more information, Please refer to Routing Plan Section.

After completing this section, we will move to next section that is creating a Client.


Now we will go to Client section.

To go to this section, Click on Termination → Client

Below displayed window will appear.

Screenshot: Client List

 To Create a New Client, Click on Create New button on the page,

Below displayed window will appear.

Screenshot: Basic Information of client

Just go on filling the Field, For more information in details regarding every single field Please refer to Client Section

After creating a New Client, we will proceed to create Trunk for Client. As we have seen above Types of Trunk,

For Client we will create a New Ingress Trunk.

Go to Routing → Trunks → Ingress

Below displayed window will appear.

Screenshot: Ingress Trunks

The options marked in red is the Ingress Trunk Menu.

On the Egress window, Click on Create New Button to create a new Egress Trunk,

Below displayed window will appear.

Screenshot: New Ingress Trunk

On the New Ingress Trunk window, Create Ingress Trunk for the Client you created earlier. You have to choose the Client Name from the Carrier dropdown.

For more Information to Create a New Ingress Trunk, Please refer to Trunks section.

You have to mainly choose the Rate Table for client & Routing Plan which we have created earlier.

After completing the Trunk creation for the Client.


We can say that our whole section is completed, we have seen above these points.

  • Rate Table for Client & Vendor

  • Created Vendor & Its Egress Trunk - Applied Rate Table to Egress Trunk

  • Routings → Dynamic and then used it in Routing Plan

  • Created Client & Its Ingress Trunk - Applied Rate Table & Assigned Routing Plan to Ingress Trunk


Now we will check if everything is correct or not so we will do the call simulation.

To check Call Simulation,

Go to Tools → Call Simulation

Below displayed window will appear.

Screenshot: Termination Call Simulation

Field Name

Description

Server

Select the Switch Server.

Ingress Trunk

The Ingress Trunk associated with the Client Account.

Host

The IP Address of the Client.

ANI

The Number of the Receiver

DNIS

The Number of the Caller.


Termination Call Simulation shown below.

Screenshot: Termination Call Simulation Result

We have simulated a call and as you can see Release Cause: Normal means that the Routing is correct. Everything is OK.

Just follow From the First Step to here.

  • No labels